JOURNAL OF MATERIALS & CONSTRUCTION
ISSN: 2734-9438
Website: www.jomc.vn
The study of force-resistance of reinforced geopolymer concrete beam
Abstract
During the recent decades, the development of geopolymer concrete technology towards to produce an alternative construction material solution for replacing the Ordinary Portland Cement (OPC) concrete. Compared to traditional concrete, the products using geopolymer material can reduce the significant amount of carbon footprint and positively impact the environment. This study demonstrated that the flexural force-resistance of Geopolymer concrete (GPC) is higher than the OPC concrete, especially the higher flexural strength about 20% to 30%. Meanwhile, the Poisson's ratio and elasticity modulus of geopolymer concrete is equivalent to OPC concrete.
References
- Djwantoro Hardjito, Chua Chung Cheak & Carrie Ho Lee Ing, Strength and Setting
- Times of Low Calcium Fly Ash-based Geopolymer Mortar, Department of Civil &
- Construction Engineering Curtin University of Technology, Sarawak Campus.
- Djwantoro hardjitoc and Shaw Shen Fung, Parametric Study on the Properties of
- GeopolymerMortar Incorporating Bottom Ash, Civil and Construction Engineering, School of Engineering and ScienceCurtin University of Technology, Sarawak, Malaysia, APSEC 2009.
- J.Davidovits, Davidovits, R., and James, The Proceeding of Geopolmer 99. 2nd International Conference on Geopolymers, 1999: p. 368.
- P.Duxson, A.Fernandez-Jimenez, J.L.Provis et al, Geopolymertechnology : the current state of the art, Advances In Geopolymer Science & Technology, 42:2917-2933, 2006.
- Palomo, A., Grutzeck, M.W., & Blanco, M.T., Alkali-activated fly ash cement for furthure. Cement and Concrete Research, 1999.
- Van Jaarsveld, J.G.S., Van Deventer J.S.J., & Lukey, G.C., The effect off composition and temperature on the properties of fly ash and kaolinite-based geopolymers. Chemical Engineering, 2002.
- Lê Hữu Quốc Phong, Nguyễn Thanh Tú, Nghiên cứu ảnh hưởng của quá trình geopolymer đến cường độ chịu nén của bê tông geopolymer sử dụng tro bay, Hội Thảo "Kiến trúc và Xây dựng hướng đến phát triển bền vững năm 2018", Trường ĐH Thủ Dầu Một (Bình Dương).
- Australian Standard 3600, Concrete Structure, 2001. Standards Australia International.
- ASTM C469, Standard Test Method for Static Modulus of Elasticity and Poission's Ratio of concrete in Compression, 1994.
- AM. Neville, Properties of concrete 2000. Sir Isaac Pitman & Sons Ltd., London
- Olivia, Monita, Durability Related Properties of Low Calcium Fly ash based Geopolymer Concrete, in Civil Engineering2011, Curtin University of Technology.
- P, Duxson, et al., Understanding the relationship between geopolymer composition, microstructure and mechanical properties. Collois and Surfaces A : Physicochemical and Engineering Aspects, 2005: p. 47-58.
- A.R.Santhakumar, Concrete Technology, Oxford University Press, 2006.
- Nuruddin, Muhd Fadhil, et al., Compressive strength and interfacial transition zone characteristic of Geopolymer concrete with different cast In-Situ curing conditions. International Scholarly and Scientific Research&Innovation, 2011.