JOURNAL OF MATERIALS & CONSTRUCTION
ISSN: 2734-9438
Website: www.jomc.vn
Experimental studying structural behavior of shear connector in cold-formed steel - concrete composite beam
Abstract
An experimental push-out test was carried out on 12 specimens in 6 groups to investigate the mechanical behavior of shear connectors in cold-formed steel-concrete composite beams. Specimen groups have differences in rivet spacing, shear connector spacing, tab aspect, and rebar through shear connectors. The mechanical behavior was evaluated through quantities such as shear resistance, relative slip between the steel beam and concrete slab, and failure modes. The results show that screw significantly affects the mechanical behavior of shear connectors in cold-formed steel-concrete composite beams.
References
- Nadim Wehbe, Pouria Bahmani, and Alexander Wehbe, “Behavior of Concrete/Cold Formed Steel Composite Beams: Experimental Development of a Novel Structural System”, International Journal of Concrete Structures and Materials, Vol.7, No.1, pp. 51–59, March 2013. DOI 10.1007/s40069-013-0031-6.
- M. A. Youns, S.A. Hassaneen, M.R. Badr and E.S. Salem, “Composite Beams of Cold-Formed Steel Section and Concrete Slab”, International Journal of Engineering Development and Research, Volume 4, Issue 4, pp.165-177, 2016.
- Ahmed Youssef Kamal, Nader Nabih Khalil, “Cold-Formed Steel U-Section Encased in Simple Support Reinforced Concrete Beam”, IJRDO-Journal of Mechanical and Civil Engineering, Volume-3, Issue-10, pp. 8-23, October,2017.
- S. O. Bamaga, M. M. Tahir, S. P. Ngian, S. Mohamad, A. Sulaiman, R. Aghlara, “Structural Behaviour of Cold-Formed Steel of Double C-Lipped Channel Sections Integrated with Concrete Slabs as Composite Beams”, Latin American Journal of Solids and Structures, Volume: 16, Issue: 5, pp. 1-15, 2019. DOI.org/10.1590/1679-78255515.
- Mahmuda, Revias, Siswa Indra, Sumiati, “The Use of Cold-Formed Steel as a Substitute for Reinforcement on Structural of Lightweight Concrete Beams”, Proceedings of the 4th Forum in Research, Science, and Technology (FIRST-T1-T2-2020), Atlantis Press B. V., volume 7, 2021, pp. 294-299.
- P. Sangeetha, P. Dinesh Kumar, I. Sai Sahith, A. Ajaykumar, “Experimental Investigation on the Cold-Formed Steel-Concrete Composite Beam Under Flexure”, Journal of Materials and Engineering Structures, 8 (2021), pp. 135–142.
- S. O. Bamaga, M. M. Tahir, C. S. Tan, “Push Tests on Innovative Shear Connector for Composite Beam with Cold-formed Steel Section”, 21st International Specialty Conference on Cold-Formed Steel Structures, St. Louis, Missouri, USA, October 24 & 25, 2012.
- S.O. Bamaga, M.M. Tahir, C.S. Tan, P.N. Shek, R. Aghlara, “Push-out tests on three innovative shear connectors for composite cold-formed steel-concrete beams”, Construction and Building Materials, Vol. 223 (2019) pp. 288–298. DOI.org/10.1016/j.conbuildmat.2019.06.223.
- Achmad Abraham S Armo et al, “Behaviour of rebar shear connector in a push test for a composite beam with cold-formed steel section”, Sriwijaya International Conference on Science, Engineering, and Technology, Materials Science and Engineering 620 (2019) 012037. DOI:10.1088/1757-899X/620/1/012037.
- ASTM International, West Conshohocken, PA, 2014. ASTM A370-14, Standard Test Methods, and Definitions for Mechanical Testing of Steel Products.
- American Institute of Steel Construction (AISI). North American Specification for the Design of Cold-Formed Steel Structural Members, 2007 edition, 2007.
- European Committee for Standardization (CEN). Design of composite steel
- and concrete structures, part 1.1. General rules and rules for building, ENV-
- -1-1. Eurocode, Brussels, Belgium, 1994.
- Ariel Hanaor, “Tests of composite beams with cold-formed sections”. Journal
- of Constructional Steel Research, Vol 54, Issue 2, pp. 245–264, (2000).
- J. M. Irwana, A.H. Hanizah, I. Azmib, “Test of shear transfer enhancement
- in symmetric cold-formed steel-concrete composite beams”. Journal of Constructional Steel Research, Vol 65, Issue 12, pp. 2087-2098, (2009).