##common.pageHeaderLogo.altText##
Tạp chí Vật liệu và Xây dựng - Bộ Xây dựng

ISSN:

Website: www.jomc.vn

Ảnh hưởng tỷ lệ SiO2/Na2O và chế độ nung đến men kết tinh hệ TiO2 khi tráng phủ trên đồng

Đào Thu Thảo , Trần Đoàn Trưởng , Nguyễn Thành Đông

Tóm tắt

Nghiên cứu này khảo sát ảnh hưởng của tỷ lệ SiO₂/Na₂O và chế độ nung đến mức độ kết tinh TiO₂ trong hệ men borosilicat–kiềm (SiO₂–B₂O₃–Na₂O/K₂O) phủ trên sản phẩm đồng mỹ nghệ. Hệ men chứa 15% TiO₂ được chế tạo và đánh giá thông qua phân tích XRD kết hợp quan sát đặc trưng lớp phủ sau nung. Kết quả cho thấy TiO₂ kết tinh dưới dạng tinh thể rutile màu trắng, tạo độ che phủ tốt cho lớp men. Trong hệ men này, tỷ lệ SiO₂/Na₂O ảnh hưởng rõ rệt đến nhiệt độ chảy, trạng thái bề mặt và mức độ kết tinh của hệ men. Việc tăng nhiệt độ nung và thời gian lưu giúp cải thiện tốt độ đồng nhất và độ bóng của lớp men phủ nhưng lại làm suy giảm mức độ kết tinh của TiO2, đồng thời thúc đẩy sự hoà tan và khuếch tán Cu từ nền đồng vào lớp men phủ, làm giảm độ trắng của men. Những kết quả này sẽ góp phần cho việc tối ưu hóa hệ men kết tinh TiO₂ phủ trên sản phẩm đồng mỹ nghệ.

Tài liệu tham khảo

  1. Fredric T. Schneider, The Art of Japanese Cloisonne Enamel: History, Techniques and Artists, 1600 to the Present, 2015.
  2. Sakamoto.K, Kỹ thuật cloisonne, 2009.
  3. O. Kazmina, V. Borovoy, V. Semenova , "White vitreous enamel for ferrous metals with preliminary thermal activation of frit" Ceramics International, vol. 47, no. 20, pp. 28471-28478, 5 October 2021.
  4. Jaroslaw Domaradzki, Magdalena Milek, Sindy Fuhrmann, Damian Wojcieszak, Michal Mazur, Sebastian Müller, Paulina Kapuscik, Diego Pozo-Ayuso, "Study of the role of a vitreous enamel layer as a primer in copper-to-glass joints" Applied Surface Science, vol. 731, p. 166478, 15 June 2026.
  5. Tanaka, Y, "Shippo-yaki (Japanese Enamels)," Industrial Research Institute, 2000.
  6. Huỳnh Đức Minh, Nguyễn Thành Đông, Công nghệ gốm sứ, Nhà xuất bản Khoa học và Kỹ thuật, 2009.
  7. Nippon Steel Corporation, "Features of Titanium," Nippon Steel Corporation, Tokyo, 2010.
  8. Richard A. Eppler and Douglas R. Eppler, "Glazes and glass coatings," American Ceramic Society, 2000.
  9. Sumana Ghosh, Kalyan Sundar Pal, Nandadulal Dandapat, Jiten Ghosh, Someswar Datta, "Glass-ceramic glazes for future generation floor tiles," Journal of the European Ceramic Society, vol. 33, pp. 935-942, May 2013.
  10. T. Mitsuhashi, O. J. Kleppa, "Transformation Enthalpies of the TiO2 Polymorphs," American Ceramic Society, vol. 62, no. 7-8, pp. 356-357, July 1979.
  11. Stacey J. Smith , Rebecca Stevens , Shengfeng Liu , Guangshe Li , Alexandra Navrotsky , Juliana Boerio-Goates and Brian F. Woodfield, "Heat capacities and thermodynamic functions of TiO2 anatase and rutile: Analysis of phase stability," American Mineralogist, February 2009.
  12. Joseph Muscat, Varghese Swamy, and Nicholas M. Harrison, "First-principles calculations of the phase stability of TiO2," Physics Magazine, 11 June, 2002.
  13. R. Casasola, J. Ma Rinco´n, M. Romero, "Glass–Ceramic Glazes for Ceramic Tiles: A Review," ournal of Materials Science , pp. 553-582, January 2012.
  14. Sérgio Teixeira, Adriano Michael Bernardin, "Development of TiO2 white glazes for ceramic tiles," Dyes and Pigments, vol. 80, no. 3, pp. 292-296, March 2009.
  15. R. D. Shannon, Arthur Leroy Friedberg, Titania Opacified Porcelain Enamels, University of Illinois, 1960.
  16. Pei Shi, Fen Wang, Jianfeng Zhu, Haibo Yang, Yi Wang, Yuan Fang, Biao Zhang, Jiahuan Wang, "Amorphous photonic crystals and structural colors in the," Journal of the European Ceramic Society, vol. 38, no. 4, pp. 2228-2233, April 2018.
  17. Nima Azhari, Chatnarin Chatchiangkan, Naris Barnthip, Sorapong Pavasupree, "Enhancing the self-cleaning properties of ball-milled TiO₂ nanoparticles: Sustainable utilization of natural rutile and leucoxene from Thailand," Case Studies in Construction Materials, vol. 23, December 2025.