##common.pageHeaderLogo.altText##
Tạp chí Vật liệu & Xây dựng - Bộ Xây dựng

ISSN:

Website: www.jomc.vn

Effect of supply coverage on the tension strength of internal cured concrete for cement-concrete pavement

Binh Le Thai

Abstract

The flexural tensile strength of cement concrete against hard pavement is one of the very important criteria that need to be researched and improved. This article presents some laboratory research results on the influence of mortar residual coefficient on the flexural tensile strength of internal curing concrete for cement concrete pavement. The research results show that the mortar residual coefficient can be selected reasonably in the range of 1.47 ÷ 1.56.

References

  1. . Bộ Xây dựng (1998), Chỉ dẫn kỹ thuật chọn thành phần bê tông các loại theo Quyết định số 778/1998/QĐ-BXD ngày 05/9/1998, Việt Nam.
  2. . Bộ Giao thông vận tải (2012), Quyết định số 1951/QĐ-BGTVT ngày 17/8/2012 ban hành “Quy định tạm thời về kỹ thuật thi công và nghiệm thu mặt đường bê tông xi măng trong xây dựng công trình giao thông”, Việt Nam.
  3. . Tiêu chuẩn Việt Nam (2009), TCVN 6260:2009 Xi măng Pooc lăng hỗn hợp – Yêu cầu kỹ thuật, Việt Nam.
  4. . Tiêu chuẩn Việt Nam (2016), TCVN 11586:2016 Xỉ hạt lò cao nghiền mịn dùng cho bê tông và vữa, Việt Nam.
  5. . Tiêu chuẩn Việt Nam (2006), TCVN 7570:2006 Cốt liệu cho bê tông và vữa – Yêu cầu kỹ thuật, Việt Nam.
  6. . Tiêu chuẩn Việt Nam (2012), TCVN 4506:2012 Nước cho bê tông và vữa – Yêu cầu kỹ thuật, Việt Nam.
  7. . Tiêu chuẩn Việt Nam (1993), TCVN 3119:1993 Bê tông nặng – Phương pháp xác định cường độ chịu kéo khi uốn, Việt Nam.
  8. . ASTM C136/C136M (2019), Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, USA.
  9. . ASTM C1761/C1761M-13b (2017), Standard Specification for Lightweight Aggregate for Internal Curing of Concrete, USA.
  10. . ASTM C330/C330M-17A (2017), Standard Specification for Lightweight Aggregates for Structural Concrete, USA.