ISSN:
Website: www.jomc.vn
Study on the treatment of dredged material as backfill material for construction projects
Abstract
Dredged sediment typically exhibits high moisture content, plasticity, and significant swelling potential, posing challenges in construction and compromising stability during land leveling and backfilling. To enhance its physico-mechanical properties and volumetric stability, solidification additives such as cement are widely employed. Cement acts as a binding agent, initiating chemical reactions with water and minerals in the sludge, thereby reducing plasticity and increasing rigidity. Furthermore, the incorporation of supplementary additives (e.g., fly ash or blast furnace slag) with cement enhances the solidification efficiency of dredged sediment and reduces material costs. This approach not only enhances material quality but also promotes the reuse of dredged sludge in sustainable construction applications. In this study, a treatment method combining cement and steel slag is proposed to stabilize dredged sediment for construction projects. When incorporating 2% cement and 10% steel slag (by weight of the original sediment), the composite’s mechanical properties fully comply with technical specifications, demonstrating its viability as backfill material in construction.
References
- Ahmed Loudini, Mounsif Ibnoussina, Omar Witam, Ali Limam, Oksana Turchanina, Valorisation of dredged marine sediments for use as road material, Case Studies in Construction Materials, 13 (2020) e00455, 2020.
- Smith, J. Use of Dredged Sediment in Construction Materials: A European Perspective. Journal of Cleaner Production, 2018.
- Zhang, H., & Liu, Q. Land Reclamation Using Dredged Sediments: Experiences from China and India. Environmental Earth Sciences, 2019.
- Johnson, R. Restoration of Coastal Wetlands Using River Dredged Material in the US. Ecological Engineering, 2020.
- Tanaka, K. Dredged Sediments for Coastal Infrastructure: The Case of Japan and Singapore. Coastal Engineering Journal, 2021.
- Petersen, T. Energy Production from Dredged Sediments: European Case Studies. Renewable Energy, 2019.
- Lê, V. T. Utilization of River Sediments in Cement Production in Vietnam. Construction and Building Materials, 2020.
- Barnes, J., et al. River Dredging Sediment Characterization and Management Strategies. Journal of Environmental Management, 2019.
- Smith, A. Mechanical Dewatering of River Sediment Using Filter Press Technology. Water Research, 2020.
- Wang, H., et al. Chemical Treatment of River Sediments for Heavy Metal Removal. Journal of Hazardous Materials, 2020.
- Zhang, Y. Adjustment in Sediment Treatment for Enhanced Metal Precipitation. Environmental Engineering Science, 2021.
- Kim, S., & Lee, D. Biological Treatment of Organic-Rich Sediment for Composting. Waste Management & Research, 2019.
- Li, X., et al. Thermal Treatment of Dredged Sediment for Construction Material Production. Construction and Building Materials, 2021.
- Gupta, N. Utilization of Treated Sediments in Cement Clinker Production. Cement and Concrete Research, 2020.
- Lưu, V. et al. Controlled Landfilling of River Dredged Sediments. Journal of Environmental Science, 2018.
- Báo cáo tổng kết đề tài “Nghiên cứu phương án tái sử dụng bùn thải từ hệ thống xử lý nước, nước thải và xỉ thải” – TP HCM, 2015. 200 trang.
- Báo cáo tóm tắt đề tài “Công nghệ xử lý, tận dụng bùn thải và nước tách bùn từ các nhà máy cấp nước”. TP HCM, 2010.
- Trần Vũ Thắng. Tái sử dụng bùn thải đô thị chứa kim loại nặng để sản xuất gạch nung trên cơ sở ổn định hóa rắn bằng xi măng và polyacrylamit. Tạp chí Tài nguyên & Môi trường, số 16 tr.13-16. - 2015
- Báo cáo tóm tắt đề tài “Nghiên cứu mức độ ô nhiễm bùn thải từ nạo vét sông, kênh rạch của Thành phố Hồ Chí Minh và xây dựng sổ tay hướng dẫn về xử lý, sử dụng bùn thải từ quá trình nạo vét sông, kênh rạch”. TP HCM, 2019.
- Nguyễn Quang Phú. Nghiên cứu cứng hóa đất bùn nạo vét bằng xi măng và phụ gia khoáng. Tạp chí KHCN Xây dựng - số 3/2022. Trang 60-68.
- US Army Corps of Engineers Waterways Experiment Station. Soil engineering and stabilization. United States, 2000.

