Vol. 16 No. 01 (2026): Journal of Materials & Construction | Tạp chí Vật liệu & Xây dựng

Nguyễn Hữu Đạt, Huynh Mai Duc, Tran Huu Trung, Nguyen Thi Thu Trang, Tran Thi Mai, Nguyen Tien Minh, Đỗ Văn Hùng, Lương Như Hải, Nguyễn Tuấn Hồng, Nguyễn Văn Thao, Nguyễn Vũ Giang

Trang 7 - Trang 14

PDF (Tiếng Việt)

Research on Attracting Investment in Transportation Infrastructure in Saline-Affected Areas along the Tien River as a Basis for Developing Tourism and Agriculture

Le Phi Vu, Nguyen Chi Nhan

Trang 180 - Trang 186

PDF (Tiếng Việt)

Introduction about standard on paints and varnishes- pull off test for adhesion

Đàm Thị Mỹ Lương

Trang 240 - Trang 241

PDF (Tiếng Việt)

Mechanical Properties of Glass/Carbon Fiber Hybrid based on Epoxy Epikote 828 Composite Materials

Hoàng Nhật Minh, Nguyễn Đức Mạnh, Nguyễn Tiến Đạt, Đặng Thị Thảo Vân, Huỳnh Việt Tiền, Lê Văn Long, Đặng Hữu Trung

Trang 89 - Trang 93

PDF (Tiếng Việt)

Solutions to improve economic efficiency when applying BIM to investment projects in Hanoi

Lê Minh Thoa, Lâm Hải Hòa, Nguyễn Thanh Huyền, Nguyễn Thanh Tuyền

Trang 117 - Trang 124

PDF (Tiếng Việt)

Study on the Influence of Slope Geometry on Slope Stability under the Impact of Climate Change

Trần Trung Việt, Quan Ho Nhat

Trang 195 - Trang 201

PDF (Tiếng Việt)

Research on creating bricks alumosilicat material from clay in Chi Linh, Hai Phong city by un-roasted method

Hà Mạnh Chiến, Lê Quang Huy

Trang 50 - Trang 52

PDF (Tiếng Việt)

Assessment of the Feasibility of Using Local Fill Materials in the Southern Key Economic Region for Roadbed Construction in Low-Lying Riverside Areas

Lê Anh Tuấn, Nguyễn Vĩnh Bảo

Trang 172 - Trang 179

PDF (Tiếng Việt)

Variation of PM2.5 concentration in central areas of Hanoi city and proposing PM2.5 pollution control measures

Nguyễn Thị Huệ, Hoàng Xuân Hòa, Nguyễn Đức Lượng, Mạc Văn Đạt, Nguyễn An Ninh, Bùi Như Khải, Bùi Quốc Anh, Nguyễn Danh Triết

Trang 232 - Trang 239

PDF (Tiếng Việt)

Investigation of mechanical properties of fine-grained concrete incorporating recycled PET flakes under thermal effects

Nguyễn Đình Hải

Trang 34 - Trang 40

PDF (Tiếng Việt)

Overview of bagasse recycling as a material for Portland cement concrete: Mechanical properties, durability, and application potential in rigid pavements

Nguyen Dinh Thang, Pham Ngoc Phuong, Huynh Trong Phuoc

Trang 53 - Trang 69

PDF (Tiếng Việt)

Building construction norms for urban railways in Vietnam: Theoretical and practical foundations

Bùi Thị Ngọc Lan

Trang 131 - Trang 138

PDF (Tiếng Việt)

Effect of fly ash content on waterproofness and shrinkage of concrete

Lê Châu Tuấn, Võ Bá Huy, Đinh Hoài Luân

Trang 84 - Trang 88

PDF (Tiếng Việt)

Integrated BIM 4D-EVM Solutions for Construction Schedule Control in Vietnam

Lê Văn Tuấn, Toan Nguyen Quoc, Nguyễn Thành Trung, Nguyễn Đức Phong

Trang 98 - Trang 109

PDF (Tiếng Việt)

Prediction of jump length, bed shear stress, and energy loss using machine learning models for a steady, free hydraulic jump on rough beds

Trịnh Công Tý

Trang 225 - Trang 231

PDF (Tiếng Việt)

Identification of schedule risk factors associated with Nominated Subcontractors (NSC) in Vietnamese construction projects

Mã Ngọc Bích Huyền, Do Tien Sy, Nguyen Thanh Viet

Trang 139 - Trang 148

PDF (Tiếng Việt)

Introducing some draft standards for the field of building in glass for the year of 2025

Mai Trọng Nguyên, Nguyễn Văn Minh, Đào Anh Tuấn, Kiều Lê Hải, Nguyễn Thị Thu Hằng, Nguyễn Thị Lệ Quyên

Trang 242 - Trang 247

PDF (Tiếng Việt)

Impacts, challenges, and solutions of urbanization on urban stormwater runoff

Nguyễn Minh Ngọc

Trang 125 - Trang 130

PDF (Tiếng Việt)

Determination of characteristic values of soil parameters in foundation design standards in Vietnam

Phạm Thế Anh

Trang 219 - Trang 224

PDF (Tiếng Việt)

Using VBA in Excel to analyze plane beam reactions by the matrix method

Khúc Thiên Thanh, Kiều Trần Thu Ngân, Đoàn Công Đức, Vũ Hồ Nam

Trang 110 - Trang 116

PDF (Tiếng Việt)

Tạp chí Vật liệu & Xây dựng - Bộ Xây dựng

ISSN: 1859-381X

DOI: 10.54772

Journal of Materials & Construction

Sience Articles

Effects of BFRP retrofitting and cyclic loading on the load-bearing capacity of reinforced concrete beam-column joints

Study on the Manufacturing of High-Strength, Water-Resistant Concrete for the Underground Structures of High-Rise Buildings in Ho Chi Minh City.

Study on the compressive strength of mortar and concrete using oyster shell aggregate as a river sand replacement

Study on Risks in Material Utilization during the Construction of Major Transportation Infrastructure Projects in Vietnam

Solutions for mobilising sustainable investment capital for Vietnam’s coastal dike system to adapt to climate change

Sustainable water resources management in China: An integrated approach to institutions, technology, and the circular economy

Circular economy in construction materials production: Current status, potential and implementation solutions

A comprehensive review of salt-contaminated sand and mineral admixture–modified Engineered Cementitious Composites (ECC): Properties and application potential in transportation infrastructure construction

Evaluation of the effects of oyster shell powder on mechanical properties of cement concrete

Identifying and analyzing factors influencing sustainable procurement in construction projects in the Mekong Delta

Standardization of hydraulic binder materials – achivements and orientation of the Vietnam Institute for Building Materials

Application of Material Flow Analysis to propose Greenhouse Gas Mitigation Solutions for the Pulp and Paper Industry – A Pilot Study at Vina Kraft Paper at Ho Chi Minh city

Study on the role of S-glass fiber in the high-temperature ablative resistance of modified phenolic resin-based composites

Research on Attracting Investment in Transportation Infrastructure in Saline-Affected Areas along the Tien River as a Basis for Developing Tourism and Agriculture

Introduction about standard on paints and varnishes- pull off test for adhesion

Mechanical Properties of Glass/Carbon Fiber Hybrid based on Epoxy Epikote 828 Composite Materials

Solutions to improve economic efficiency when applying BIM to investment projects in Hanoi

Study on the Influence of Slope Geometry on Slope Stability under the Impact of Climate Change

Research on creating bricks alumosilicat material from clay in Chi Linh, Hai Phong city by un-roasted method

Assessment of the Feasibility of Using Local Fill Materials in the Southern Key Economic Region for Roadbed Construction in Low-Lying Riverside Areas

Variation of PM2.5 concentration in central areas of Hanoi city and proposing PM2.5 pollution control measures

Investigation of mechanical properties of fine-grained concrete incorporating recycled PET flakes under thermal effects

Overview of bagasse recycling as a material for Portland cement concrete: Mechanical properties, durability, and application potential in rigid pavements

Building construction norms for urban railways in Vietnam: Theoretical and practical foundations

Effect of fly ash content on waterproofness and shrinkage of concrete

Integrated BIM 4D-EVM Solutions for Construction Schedule Control in Vietnam

Prediction of jump length, bed shear stress, and energy loss using machine learning models for a steady, free hydraulic jump on rough beds

Identification of schedule risk factors associated with Nominated Subcontractors (NSC) in Vietnamese construction projects

Introducing some draft standards for the field of building in glass for the year of 2025

Impacts, challenges, and solutions of urbanization on urban stormwater runoff

Determination of characteristic values of soil parameters in foundation design standards in Vietnam

Using VBA in Excel to analyze plane beam reactions by the matrix method

Chuyển đổi số

Developing a BIM (Building Information Modeling) implementation process in accordance with ISO 19650 for construction companies